When it comes to roofing, we've got you covered!!
We supply 2 types of sheets used in roofing projects.
1. Structured sheet
- called Multiwall Polycarbonate (fluted with air channels).
2. Solid sheet
- like clear Polycarbonate, or clear Acrylic (solid sheets like glass)
What's it likely to cost me?
Here's an example of a 3mtr x 3mtr roof project using 10mm Multiwall and the same job priced in 16mm Multiwall. Size is 3mtr along wall x 3mtr fall or slope down to the gutter.
- Remember that the flute or channels in the sheet should always point down the slope, so in this example, you will have 2 sheets 1500mm wide, laid side by side, with a join down the middle, running the 3mtr length down to the gutter. (The capex bar will cover this join).
| in 10mm Multiwall | in 16mm Multiwall |
| 2 sheets 1500mm wide x 3000 fall (sheets blown and taped) @ €94.00ea |
2 sheets 1500mm wide x 3000 fall (sheets blown and taped) @ €126.00ea |
| Aluminium F section 10mm (3mtr) x 2 - used on start and end rafters @ €33.28ea |
Aluminium F section 16mm (3mtr) x 2 - used on start and end rafters @ €33.28ea |
| PVC 'U' profiles for ends of sheet x 2 @ €6.96ea |
PVC 'U' profiles for ends of sheet x 2 @ €6.96ea |
| Fixing buttons (pack of 10) x 2 @ €7.73ea |
Fixing buttons (pack of 10) x 2 @ €7.73ea |
| Capex bar 40mm, 3mtr long x 1 (used over join between the 2 sheets down the slope) @ €41.43ea |
Capex bar 60mm, 3mtr long x 1 (used over join between the 2 sheets down the slope) @ €50.95ea |
| DC 799 clear silicone x 1 @ €10.70ea |
DC 799 clear silicone x 1 @ €10.70ea |
| Wall Saw Cutting @ €0.00 |
Wall Saw Cutting @ €0.00 |
| TOTAL without delivery, without vat €413.21 |
TOTAL without delivery, without vat €503.03 |
To help speed up your enquiry, read the tips below before you contact us...
-
DIMENSIONS - have an idea of the dimension or area you wish to cover. We need this to work out the size of the roofing sheet you require. Please give us your dimensions in feet or mm.
-
MATERIALS - have a think about the type of sheet you want to use (se pics above). Multiwall sheet is clear with ribs / flutes running through the sheet. It is cheaper per sq. mtr and can cover much larger areas (stock sheets are 2.1mtr x 7mtr long). Solid Polycarbonate sheet will look like glass. It comes in smaller sheet sizes (10' x 6') and will be more expensive per sq. mtr than Multiwall sheet.
-
RAFTER SPACING - if you have rafters already in place, let us know the spacing or distance between those rafters. This dictates how we will cut and supply the sheet.
-
LOCATION - let us know where you are in the country. This is required for the transportation cost in your quotation.
- CONTACT NUMBER - if we can phone you with any queries, rather than email you, it means that we can provide the quotation for you much quicker.
Notes about CUTTING
We can cut sheets into square or rectangular panels. Cutting is FREE on most jobs but if you come to us with a very large, multiple panel job requiring our saws, work area and staff to be engaged for several hours, then there will most likely be a charge. Please ask ahead of time.
Our industrial saws are wall mounted (for multiwall cutting) and flatbed (for sheet cutting). For this reason, we cannot cut angles on any sheets. We can of course supply the 'master' rectangular or square panel and you may cut the angle yourself.
Notes about DELIVERY costs
We do not have any mark up on delivery - we give your details to our courier list and we get the best price. This price is based on what is being transported (volume/weight) and the distance it is going. Delivery to e.g. Kerry, will obviously be more expensive than delivery to e.g. Kildare.
For delivery of Multiwall orders nationwide, you need to allow a figure of between €60.00 to €85.00 + vat 23%. Delivery costs should not exceed €85.00
We work with large commercial roofing contractors, small business owners and also private citizens who wish to install roofing projects. Please note that we supply only. You would need to install yourself DIY or contract someone to do the job for you.